Settings / Registration
Preferences > Timer / Energy Settings > Use Motion Sensor
In Settings / Registration, you can disable the sensor and select the sensor sensitivity.
Shutdown Sequence
Before shutting down the power supply, it is necessary to perform the HDD completion process (Purpose: to prevent damage on
the HDD) and execute the fixing disengagement operation. This series of process is called "shutdown sequence".
With this machine, the Main Controller PCB detects turning OFF the Main Power Supply Switch, and the shutdown sequence is
started and executed automatically.
Note that the maximum shutdown time with this machine is 90 seconds. (If the maximum of 90 seconds has elapsed, the power
supply is turned OFF by the hard timer circuit on the Relay PCB.)
NOTE:
If the power supply is stopped without shutting down the machine, or if the processing to completely delete the hard disk (deletion
of the primary file) fails to be completed within the shutdown time (max. 90 sec.), data consistency is checked at startup, during
which the progress bar is displayed.
65
2. Technology