Toro GreensPro 1260 Operator's Manual page 25

2. Raise the machine onto the transport wheels;
refer to Raising the Machine onto the Transport
Wheels (page 16).
3. Tilt the machine so that the end of the machine
with the engine is closer to the ground, and
support the other end of the machine to hold it in
this position.
Draining the Engine Oil
1. Install the drain hose onto the drain valve
29).
2. Place the other end of the hose
a drain pan with a 1 L (1 US qt).
(Figure
(Figure 29) into
3.
4.
5.
6.
25
Figure 29
Turn the oil drain valve 1/4 turn counterclockwise
and allow the engine oil to drain completely
(Figure 29).
Turn the oil drain valve 1/4 turn clockwise to
close the valve (Figure
Remove the drain hose
any spilled oil.
Dispose of the waste oil properly.
Note:
Recycle it according to local codes.
g029369
29).
(Figure 29) and wipe