5.
Set the window as follows to add the module label of the D/A converter module.
6.
Set "Basic setting" of "Module Parameter" of the D/A converter module as shown below.
[Navigation window] [Parameter] [Module Information] [R60DAH4] [Module Parameter] [Basic setting]
7.
Set "Application setting" of "Module Parameter" of the D/A converter module as shown below.
[Navigation window] [Parameter] [Module Information] [R60DAH4] [Module Parameter] [Application setting]
8.
Write the set parameters to the CPU module on the master station. Then, reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
7 OPERATION EXAMPLES
32
7.2 Program Example (for Normal Output Mode)