Mitsubishi Electric MELSEC iQ-R Series User Manual page 45

Program examples
■Wave output data read processing program example
Set CH1 D/A conversion enable/disable setting to D/A conversion enable. Moreover, read the data from the file register (ZR)
in which the wave pattern and parameter settings of wave output function are stored and register it in the buffer memory of the
D/A converter module.
Once the wave output data read is completed, enable the settings using the operating condition setting request program.
(Page 45 Operating condition setting request processing program example)
(0) Sets 'CH1 D/A conversion enable/disable setting' (U0\G500) to D/A conversion enable (0).
(36)Turns on the wave data read (device) function block start flag (M0) and registers the wave pattern and parameter settings of wave output function in the
buffer memory.
(409)Turns off the wave data read (device) function block start flag (M0).
7 OPERATION EXAMPLES
7.3 Program Example (for Wave Output Mode)
7
43