Mitsubishi Electric MELSEC iQ-R Series User Manual page 35

Label settings
GX Works3 provides functions that support the creation of a program.
The following table lists the module labels and global labels used for the program examples in this section.
There is no need to change the settings of the module labels. For details on the global labels, refer to the following.
 MELSEC iQ-R Programming Manual (Program Design)
Classification Label name
Module label R60DAH_1.bModuleREADY
R60DAH_1.bExternalPowerSupplyREADY_Flag
R60DAH_1.bDisconnectionDetectionSignal
R60DAH_1.bWarningOutputSignal
R60DAH_1.bErrorFlag
R60DAH_1.bCH1OutputEnableDisableFlag
R60DAH_1.bCH2OutputEnableDisableFlag
R60DAH_1.bCH3OutputEnableDisableFlag
R60DAH_1.bCH4OutputEnableDisableFlag
R60DAH_1.bWarningOutputClearRequest
R60DAH_1.stnControl[0].wDigitalValue
R60DAH_1.stnControl[1].wDigitalValue
R60DAH_1.stnControl[2].wDigitalValue
R60DAH_1.stnControl[3].wDigitalValue
R60DAH_1.uDisconnectionDetectionFlag.3
R60DAH_1.uWarningOutputUpperFlag.1
R60DAH_1.uWarningOutputLowerFlag.1
Labels to be Define global labels as shown below:
defined
Description
Module READY
External power supply READY flag
Disconnection detection signal
Warning output signal
Error flag
CH1 Output enable/disable flag
CH2 Output enable/disable flag
CH3 Output enable/disable flag
CH4 Output enable/disable flag
Warning output clear request
CH1 Digital value
CH2 Digital value
CH3 Digital value
CH4 Digital value
CH4 Disconnection detection flag
CH2 Warning output upper flag
CH2 Warning output lower flag
7 OPERATION EXAMPLES
7.2 Program Example (for Normal Output Mode)
Device
X0
X7
XD
XE
XF
Y1
Y2
Y3
Y4
YE




7



33