User Group Read Selection (Pr. 160); Pm Parameter Initialization (Pr. 998); Automatic Parameter Setting (Pr. 999) - Mitsubishi Electric FR-A800 Series Beginner's Manual

The simple mode parameters in detail
6.2.9

User group read selection (Pr. 160)

This function restricts the parameters that are read by the parameter unit.
With the initial value (Pr. 160 = "0"), simple mode parameters and extended parameters can be dis-
played.
When Pr. 160 is set to "9999", only the simple mode parameters can be displayed on the parameter
unit. For the simple mode parameters, refer to the parameter list on page 6-1.
For more details refer to the Instruction Manual of your inverter.
6.2.10

PM parameter initialization (Pr. 998)

Pr. 998 „PM parameter initialization" sets parameters required for driving an IPM motor MM-CF. The
offline auto tuning enables the operation with an IPM motor other than MM-CF and with SPM motors.
Pr. 998 setting Description
0
(initial value)
3003
3103
8009
8109
9009
9109
For more details refer to the Instruction Manual of your inverter.
6.2.11

Automatic parameter setting (Pr. 999)

Multiple parameter settings are changed automatically. Those include communication parameter
settings for the Mitsubishi's human machine interface (GOT) connection and the parameter setting
for the rated frequency settings of 50 Hz/60 Hz and acceleration/deceleration time.
Following table shows the setting values for Pr. 999. Select which parameters to automatically set and
set them in Pr. 999.
Pr. 9999
setting
1
2
10
11
12
13
20
21
9999
For more details refer to the Instruction Manual of your inverter.
6 - 8
Parameter settings for an induction motor (frequency)
For IPM motor MM-CF.: Parameter setting (rotations per minute)
For IPM motor MM-CF: Parameter setting (frequency)
The parameters settings required to drive an IPM motor other than MM-CF
are set (rotations per minute) (after tuning).
The parameters settings required to drive an IPM motor other than MM-CF
are set (frequency) (after tuning).
The parameters settings required to drive an SPM motor are set (rotations per
minute) (after tuning).
The parameters settings required to drive an SPM motor are set (frequency)
(after tuning).
Description
Sets the standard monitor indicator setting of PID control.
Automatically sets the monitor indicator for PID control.
Automatically sets the communication parameters
for the GOT connection with a PU connector
Automatically sets the communication parameters
for the GOT connection with RS-485 terminals
Automatically sets the communication parameters
for the GOT connection with a PU connector
Automatically sets the communication parameters
for the GOT connection with RS-485 terminals
50 Hz rated frequency
60 Hz rated frequency
No action
Set Pr. 71 "Applied motor"
and perform offline auto
tuning in advance
"Controller Type" in GOT:
FREQROL 500/700/800, SENSORLESS SERVO
"Controller Type" in GOT:
FREQROL 800(Automatic Negotiation
Sets the related parameters of the rated frequency
according to the power supply frequency
Parameter