ABB ACS880-207 Hardware Manual page 41

CODE DESCRIPTION
3G335 A-meter in three phases
G336 Arc monitoring unit, 1 loop, Rea 101, including cable
G337 Arc monitoring with current monitoring unit
G343 Corrosion classification coupon in ACU (Purafil 3AUA64044052)
G344 Auxiliary voltage transformer
G426 Arc monitoring unit, extension for 2 loops, Rea 105, including cable
G442 Voltage measurement with BAMU auxiliary measurement unit. Weak supply networks: In weaker
supply networks with a short-circuit ratio less than 8, it is highly recommended to install a BAMU
auxiliary measurement unit to the drive. In such networks, there is a risk of nuisance DC overvoltage
tripping due to disturbances caused by probable high-voltage THD in the supply voltage. Short-
circuit ratio is defined as the supply network's apparent short-circuit power S
drive's nominal apparent power S
G453 Common mode filter temperature monitoring
Cabling
H351 Power cabling through roof of cabinet
H358 Blind 3 mm steel cable gland plates
H364 Blind 3 mm aluminium cable gland plates
H365 Blind 6 mm brass cable gland plates
H368 Control cabling through roof of cabinet
Control panel and PC options
J400 Control panel ACS-AP-W (max. 4 panels on the door)
J401 LED monitoring display
J410 Drive control panel connection kit
J411 Remote supply ON/OFF control (from upper controller)
J412 Common control panel for a line up
J425 ACS-AP-I control panel
Fieldbus adapter modules
K450 Panel Bus, built with Ethernet cable, needs FDPI option board in each unit, max. 32
K451 FDNA-01 DeviceNet adapter module
K454 FPBA-01 PROFIBUS DP adapter module
K457 FCAN-01 CANopen adapter module
K458 FSCA-01 Modbus RTU adapter module
K462 FCNA-01 ControlNet adapter module
K469 FECA-01 EtherCAT adapter module
K470 FEPL-02 Ethernet POWERLINK adapter module
K473 FENA-11 EtherNet/IP, Modbus TCP and PROFINET adapter module
Operation principle and hardware description 41
(S / S < 8).
n k,net n
divided by the
k,net