Connection Diagram (Frame R8I And Multiples); Connection Procedure (Frame R8I, Limited Scope Version) - ABB ACS880-207 Hardware Manual

1)
Note: Fuses or other protection means.
Use a separate grounding PE cable
conductivity of the shield does not meet the requirements for the PE conductor. See Electrical
planning instructions for ACS880 multidrive cabinets and modules (3AUA0000102324
[English]).
For the cable selection instructions, see Electrical planning instructions for ACS880 multidrive
cabinets and modules (3AUA0000102324 [English]).
The cable lead-through details (number and size of holes), and cable connection details
(number and dimensions of busbars, tightening torque) are given in chapter

Connection diagram (frame R8i and multiples)

￭
1)
3)
2)
1)
Note: Fuses or other protection means.
Use a separate grounding PE cable
conductivity of the shield does not meet the requirements for the PE conductor. See Electrical
planning instructions for ACS880 multidrive cabinets and modules (3AUA0000102324
[English]).
For the cable selection instructions, see Electrical planning instructions for ACS880 multidrive
cabinets and modules (3AUA0000102324 [English]).
The cable lead-through details (number and size of holes), and cable connection details
(number and dimensions of busbars, tightening torque) are given in chapter

Connection procedure (frame R8i, limited scope version)

￭
The cable lead-through details, and cable connection details are shown in section
and cable entry data for the input power cable (page
WARNING!
Only qualified electricians are allowed to this work. Read the complete safety
instructions of the drive. Ignoring the instructions can cause physical injury or
death, or damage to the equipment.
2)
or a cable with a separate PE conductor
Components
for charging
circuit
ICU cubicle
ISU cubicle
2)
or a cable with separate PE conductor
Electrical installation 49
LCL filter IGBT supply module
129).
3)
if the
Technical data.
11
3)
if the
Technical data.
Terminal