Materials; Applicable Standards; Markings - ABB ACS880-207 Hardware Manual

Materials

Cabinet
Busbars for user power
connections
Fire safety of materials
(IEC 60332-1)
Package
Disposal

Applicable standards

See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]).

Markings

See Electrical planning instructions for ACS880 multidrive cabinets and modules
(3AUA0000102324 [English]).
•Zinc coated steel sheet
•Polyester thermosetting powder coating on visible surfaces, color RAL Classic
7035 and RAL Classic 9017
Tin-plated copper
Insulating materials and non-metallic items: mostly self-extinctive
Standard package:
•timber, polyethylene sheet (thickness 0.15 mm), stretch film (thickness 0.023 mm),
PP tape, PET strap, sheet metal (steel)
•for land and air transport when planned storage time is less than 2 months or
when storage can be arranged in clean and dry conditions less than 6 months
•can be used when products will not be exposed to corrosive atmosphere during
transport or storage
Container package:
•timber, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE, thickness
0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)
•for sea transport in containers
•recommended for land and air transport when storage time prior to installation
exceeds 6 months or storage is arranged in partially weather-protected conditions
Seaworthy package:
•timber, plywood, VCI sheet film (PE, thickness 0.10 mm), VCI stretch film (PE,
thickness 0.04 mm), VCI emitter bags, PP tape, PET strap, sheet metal (steel)
•for sea transport with or without containerization
•for long storage periods in environments where roofed and humidity-controlled
storage cannot be arranged
Cabinets are attached to the pallet with screws and braced from the top end to the
package walls to prevent swaying inside the package. Package elements are at-
tached to each other with screws.
The main parts of the drive can be recycled to preserve natural resources and en-
ergy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery. Printed circuit boards and large electro-
lytic capacitors need selective treatment according to IEC 62635 guidelines. To
aid recycling, plastic parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must
follow international and local regulations. See ACS880 cabinet-installed drives re-
cycling instructions and environmental information (3AXD50000153909 [English]).
Technical data 137