Operation - Silvercrest SBP 1960 A1 Operating Instructions Manual

Operation

WARNING! RISK OF INJURY!
► Parts of the appliance get hot during use. Risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not insert anything into the blower
base
NOTE
► A slight odour may develop during the first applications. This is harmless to
health and does not represent a fault in the appliance.
Adjust the nylon balloon
–
For smaller clothing items, the side zips should be closed on both sides.
For larger garments, the side zips should be opened.
–
If you want to dry a hooded top, open the zip on the neck of the nylon
balloon
Pull the garment to be ironed onto the nylon balloon
Make sure that...
–
the collar of the garment is correctly positioned over the neck of the
hanger
–
the hood hangs over the neck with the zip open,
–
the arms of the nylon balloon
of the garment,
–
all buttons (also on the sleeves) are done up,
–
the button strip lies centred over the row of holes on the nylon balloon
Distribute the weight clamps
They ensure that the clothing does not wrinkle or lose its shape during the
drying process.
Turn the dial
time. You have the choice between a minimum of 5 and a maximum of
30 minutes in steps of 5 minutes.
HINWEIS
► The maximum drying time is 30 minutes. If you turn the dial
than this, all LEDs
│ GB │ IE
■ 26
and do not cover it.
to fit the garment to be dried using the zips:
. Close this zip for hoodless clothing.
,
clockwise until the LED
will be flashing for a few seconds.
in the housing of the appliance
are smooth and straight in the sleeves
evenly over the lower hem of the garment.
lights up with the desired drying
and smooth it out.
.
further
SBP 1960 A1