4.8.5 Saving CPU link parameters in file (for S10V controllers only)
Function: Saves the displayed CPU link parameters in a specified file. (This feature is supported
only by Ver-Rev 01-02 or later of the S10V CPU link system and can be used only in
online mode.)
Operation: The procedure used is described below.
① In the [[Online] PCs edition] window displayed as shown below, click the
Figure 4-23 [[Online] PCs edition] Window and Clicking the
The [Save As] window will then appear if the range of storage specified by parameters is
error-free. If not, an error message will be displayed instead. In this case, remove the
cause of the error and click the
Save
button again.
Figure 4-24 [Save As] Window
4-23
4 OPERATION
Save
button.
Save
Button