Advertisement
Figure 56 Pull the CF card
3.
To install a new MIM, see
NOTE:
To protect the CF card, place it into an antistatic bag.
Replacing a transceiver module
NOTE:
When replacing a transceiver module, make sure that the two transceiver modules connected by the same
optical fiber have the same wavelength.
To replace a transceiver module:
1.
Remove the optical fibers from the transceiver module.
2.
Pivot the clasp down to the horizontal position.
3.
Holding the handle of the transceiver module, gently pull the transceiver module out. See
57.
Insert the plastic plug to the removed transceiver module, and put the transceiver module into its
4.
original shipping materials.
5.
If you do not install a new transceiver module in the interface, install a dust-proof plug in the
interface. To install a transceiver module, see
"Installing a CF
card."
"Connecting a fiber
44
cable."
Figure
Advertisement
