Advertisement
Figure 59 Pulling out the fan tray
3.
To install a new fan tray, grasp the handle of the fan tray with one hand and support the fan tray
bottom with the other, and slide the fan tray along the guide rails into the slot until the fan tray seats
in the slot and has a firm contact with the backplane.
4.
Use a Phillips screwdriver to fasten the captive screw on the fan tray.
NOTE:
Automatic fan speed adjustment and hot-swapping fan trays are supported.
•
Put the removed fan tray in an anti-static bag.
•
Replacing a memory module
CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
•
chassis, contact the local agent of HP for permission. Otherwise, HP shall not be liable for any
consequence caused thereby.
Use the memory modules provided by HP only. Otherwise, the router may be unable to operate
•
properly.
•
For the specifications of memory modules supported, see
specifications."
"Appendix A Chassis views and Technical
46
Advertisement
