Download Print this page

HP HSR6600 Series Installation Manual page 67

Advertisement

When the system is over-temperature. In this case, the system displays the following output:
%Dec
CPU temperature is greater than alarm upper limit in slot 0, index is 0.
To solve the problem, check the output (such as the system temperature, insufficient available power, and
PCB voltage alarms) on the serial terminal and the software management tool.
If the cause cannot be located in the steps above and the problem persists, record the above information,
and contact your local sales agent.
Table 20 Router status LED description
LED
PWR1 (red/green)
PWR2 (red/green)
FAN (red/green)
ALM (red)
RUN (green)
FIP module failure
If the RUN LED of the FIP module is off, it indicates that the FIP module is powered off or faulty.
To troubleshoot the FIP module failure:
1.
Check whether the router is powered on.
2.
If the router is powered on, check whether the FIP module is plugged in a right slot.
3.
If the FIP module is plugged in a right slot, it indicates that the FIP module is faulty. Contact your
local sales agent.
Power module failures
If the router cannot be powered on and the power LED on the front panel is off, it indicates that the power
module is faulty.
7 11:17:01:436 2011 HP DRVMSG/3/TEMP_ALARM:
Status
Off
Steady green
Steady red
Off
Steady green
Steady red
Off
Steady green
Steady red
Steady on
Off
Off
Flashes at 1 Hz
Flashes at 8 Hz
Remarks
The power module is not in position.
The power module is supplying power properly.
No power is input or the power module is faulty
when PWR2 is operating properly.
The power module is not in position.
The power module is supplying power properly.
No power is input or the power module is faulty
when PWR1 is operating properly.
No power is input or the fan tray is not is position.
The fan tray is operating properly.
The fan tray is faulty.
No alarm exists.
The router is faulty. You need to view the system
logs immediately.
No power is input or the router is faulty.
The router is operating properly.
The router is loading software or has not started.
61

Advertisement

loading

This manual is also suitable for:

Hsr6602-gHsr6602-g taaHsr6602-xgHsr6602-xg taaJg353aJg354a ... Show all