Advertisement
ALM LED is red
When the router is running, the ALM LED on the fan tray panel may turn red, and the following
information may appear on the configuration terminal:
%Dec
6 17:13:56:447 2011 HP DEVM/5/FAN_RECOVERED: Fan 1 recovered.
%Dec
6 17:13:58:158 2011 HP DRVMSG/3/FanErr: Fan 1 Error.
#Dec
6 17:13:58:847 2011 HP DEVM/1/FAN STATE CHANGES TO FAILURE:
Trap 1.3.6.1.4.1.25506.8.35.12.1.6: fan ID is 1
%Dec
6 17:13:58:847 2011 HP DEVM/2/FAN_FAILED: Fan 1 failed.
The output shows that fan 1 is faulty.
To solve the problem, check whether any foreign object has entered the fan tray.
If the cause cannot be located in the steps above and the problem persists, contact your local sales
agent.
HIM/MIM failures
When a HIM/MIM is plugged while the router is running, the following information may appear on the
configuration terminal:
%Dec 30 09:54:10:264 2011 66mcp DRVICOUT/1/DrvIcOutStr:
Card in Slot 4 Sublot 2 can not be recognized !
The output indicates that the HIM/MIM is faulty or the router cannot recognize the HIM/MIM.
To troubleshoot the HIM/MIM failure:
1.
Check whether the HIM/MIM is firmly seated.
2.
Check whether the HIM is correctly plugged into an FIP-20 module. An FIP-10 module does not
support HIMs.
3.
Check whether the interface module connector pins of the FIP module are bent.
4.
If the cause cannot be located in the steps above and the problem persists, contact your local sales
agent.
Configuration system problems
If the configuration environment setup is correct, the configuration terminal displays boot information
when the router is powered on. If the setup is incorrect, the configuration terminal displays nothing or
garbled text.
No terminal display
If the configuration terminal displays nothing when the router is powered on, To troubleshoot the failure:
1.
Check the following items.
The power supply system works properly.
The console cable is properly connected.
63
Advertisement
