Silvercrest SWW 1500 A1 75784 Operating Instructions Manual page 42

Panel heater
Table of Contents

Advertisement

Available languages

Available languages

Initial use
Requirements for the set-up location
For safe and faultless operation of the device the set-up location must satisfy the
following criteria:
The device must only be operated in an upright position and completely assembled.
The appliance must be placed on a fi rm, fl at and horizontal fl oor.
The minimum distances of the housing from other objects must be maintained, they
are; 100 mm at the sides, 300 mm above and 500 mm in front.
Do not stand and/or hang the device in a hot, wet or very moist environment or
in the vicinity of fl ammable materials.
The mains wall socket must be easily accessible so that the mains power cord
can be easily removed in an emergency.
Environment temperature range: +5 to +45 °C
Humidity (no condensation): 5 - 90 %
DANGER
Fire hazard through contact with materials!
The risk of fi re exists if the heating elements come into contact
with fl ammable materials!
Do not place and/or hang the device in the vicinity of curtains and other
fl ammable materials.
Do not allow fl ammable materials (i.e. draperies) to come into contact with
the device.
Do not cover the device.
Before initial use
Remove all packaging materials and all transport securing devices from the device.
NOTICE
With initial use, for a brief period, a light odour accumulation can occur.
This is normal and completely harmless.
SWW 1500 A1
GB
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

75784

Table of Contents