Silvercrest SWW 1500 A1 75784 Operating Instructions Manual page 46

Handling and operation
NOTICE
► As soon as the temperature at the temperature sensor integrated into the
device has reached the set nominal temperature the heating element
switches off and in the display
► As soon as the temperature falls below the nominal temperature the
heating element
HIGH and/or LOW lights up continuously.
Programming the switch off time
♦ Beforehand, select the desired heating mode (HIGH or LOW) and, if desired,
the nominal temperature (see Chapter "Heating operation" and "Setting the
nominal temperature").
♦ Press the button AUTO OFF
indicator for automatic switch off AUTO OFF
for 5 seconds.
♦ Whilst the preset time is blinking in the display
+/-
24 hours. As soon as the set heating mode (HIGH or LOW) or the set target
temperature is again indicated in the display
and the appliance switches itself off with the lapse of the time period.
♦ Press the button AUTO OFF
the switch off time. In the display
Programming the switch on time
♦ Activate the main switch POWER
standby operation.
♦ Press the button AUTO ON
indicator for automatic switch on AUTO ON
for 5 seconds.
♦ Whilst the preset time is blinking in the display
+/-
hours.
♦ After 5 seconds the indicator in the display
temperature.
♦ Whilst the nominal temperature is blinking in the display
the buttons +/-
15°C - 35°C.
♦ After 5 seconds the preset switch-on time is shown continuously in the
display
SWW 1500 A1
switches on again and in the display
9
4 and/or to set the desired switch off time between 1 hour and
13
and/or to set the desired switch on time between 1 hour and 24
4 13
4 resp. , to set the desired nominal temperature from
13
and the settings are taken over.
the indicator HIGH and/or LOW blinks.
5 and/or . In the display
14
and the preset time blinks
press one of the buttons
, the setting has been accepted
and/or again if you want to deactivate
5 14
the indicator AUTO OFF
to switch the device on and to shift into
6
and/or . In the display
2 11
and the preset time blinks
press one of the buttons
changes to set the nominal
9
the indicator
appears the
goes out.
appears the
, press one of
43
GB