Pr.
Pr.
Name
group
PU mode
operation
551
D013
command source
selection
20
PARAMETER
Initial
Setting
value
range
The RS-485 terminals are the command source when in the PU operation
1
mode.
2
The PU connector is the command source when in the PU operation mode.
3
The USB connector is the command source when in the PU operation mode.
9999
The command source is specified as communication via Ethernet connector
5
in the PU operation mode.
Do not select this setting while the product is installed.
USB automatic recognition
9999
Normally, the PU connector is the command source. When the USB is
connected, the USB connector is the command source.
Description