Wireless Function; Zone Follow Function - Beko BP109C User Manual

6 Operation introduction

6.10 Wireless function

- Long press the Speed button for 5s, enter the wireless factory set up mode;
- The unit is connected with wireless If the wireless indicator is on, otherwise is not connected.
When the wireless indicator flashing slowly, the unit is at the wireless set up mode, if flashing
quickly, the unit is connected with wireless;
- You can realize most of the air conditioner functions by the mobile phone APP (HomeWhiz) with
Timer
the wireless connected.

6.11 Zone follow function

F
- You can switch on or off the Zone follow function through the remote controller;
- When this function is on, the unit will control the temperature of the room by the temperature sensor
inside the remote controller (the room temperature sensor inside the machine will not work again)
- This function will be off if the unit have not received the signal from the remote controller in
30 minutes. It will switch to the normal room temperature sensor inside the unit to control the
temperature.
38 / 220 EN
Mode
E D
Portable Air-conditioner / User Manual
C
Speed
B