Method For Starting Up Komtrax Terminal - Komatsu PC500LC-10R Shop Manual

30 TESTING AND ADJUSTING

METHOD FOR STARTING UP KOMTRAX TERMINAL

Method for starting-up KOMTRAX
Observe the following when using KOMTRAX.
1.
KOMTRAX key person performs "Machine Registration" by using KOMTRAX client PC.
2.
Perform "KOMTRAX Communication Inspection".
• For operation procedures, see "Global KOMTRAX Web Reference Manual (For Key Person)".
• Operating the KOMTRAX client PC requires the KOMTRAX key person authority of each distributor.
Therefore, consult the KOMTRAX key person before using it.
When KOMTRAX terminal is replaced.
Observe the following when replacing KOMTRAX terminal and using it again.
1.
Our technician provides a new terminal, and records the part number and serial number.
2.
Our technician replaces the terminal, and perform "KOMTRAX Communication Inspection". Our technician
notifies KOMTRAX key person of the completion of inspection work and new terminal information.
3.
KOMTRAX key person performs "Terminal Replacement" by using KOMTRAX client PC.
4.
KOMTRAX key person fills in required items on "Terminal Replacement Sheet", and send it by email to
KOMTRAX support center via KOMTRAX administrator in the subsidiary.
• For details, see "Global KOMTRAX Web Reference Manual (For Key Person)".
• Operating the KOMTRAX client PC requires the KOMTRAX key person authority of each distributor.
Therefore, consult the KOMTRAX key person before using it.
Machine side inspection for KOMTRAX Communication opening
• KOMTRAX Communication Inspection must be done to check whether normal communication is available
from the terminal when the KOMTRAX terminal is replaced or started up.
• By performing this inspection, KOMTRAX starts communication.
• GPS and data communication are checked during the KOMTRAX Communication Inspection. Accordingly,
it is preferable to place the machine under the open sky where radio wave from the satellite is not blocked.
The opening inspection may not be completed when the machine is placed indoor where radio wave from
the satellite is blocked.
1.
Check the machine for KOMTRAX Communication Inspection
Observe the following when checking if KOMTRAX Communication Inspection is required or not.
1)
On "Service Menu" screen, select "KOMTRAX Set-
tings" with function switches or numeral input
switches.
PC500LC-10R
METHOD FOR STARTING UP KOMTRAX TERMINAL
30-173