Adjust Rearview Camera Angle; Method For Adjusting Rear View Camera Angle - Komatsu PC500LC-10R Shop Manual

ADJUST REARVIEW CAMERA ANGLE

ADJUST REARVIEW CAMERA ANGLE

METHOD FOR ADJUSTING REAR VIEW CAMERA ANGLE

k
Adjust the camera always before starting the work. You
cannot secure the visibility and a serious personal in-
jury or death may result if the camera is not adjusted
properly.
k
Prepare a scaffold first in order to provide a safe work-
ing platform for the time when adjusting the angle of
the camera.
If you try to work standing on the counterweight, there
is a danger of serious injury or death due to falling off
from the machine.
Adjust the angle of the rearview camera so that people within
approximately 1 m {3ft 3in} away from the machine's rear part
(W) can be seen in the machine monitor at the operator's seat.
If the image on the monitor is not aligned correctly, adjust the
mounting angle (A) of the rearview camera in the following pro-
cedure.
Angle (A) can be adjusted within the range from 32 to 53 °.
30-178
30 TESTING AND ADJUSTING
PC500LC-10R