101 Testing and adjusting, Part 1
Angle adjustment of rear view camera
Angle adjustment of rear view
camera
Adjust the camera so that persons in area (w) at 1
meter around the machine is displayed on the
machine monitor in the operator cab.
If the image displayed on the monitor is out of posi-
tion, remove cover (2) of camera (1) and adjust the
installation angle (A) of the rear view camera.
PC200, 200LC, 220, 220LC-8M0
1.
Remove cover (2) by inserting flat-head screw-
driver [1] in the hole in cover (3) and pressing
1
the internal pawl.
a Claw of cover (2) is made of plastic, it is
easily damaged while removing, therefore
take special care at work.
2.
Remove two bolts (4).
3.
Remove cover (2).
SEN06127-00
65
30-101