Checks Before Troubleshooting - Komatsu PC200-8M0 Shop Manual

SEN06132-01

Checks before troubleshooting

No.
1 Check for unusual sounds and smells
2 Check for dirt around engine
3 Check for water leakage around engine
4 Check for oil leakage around engine
5 Check for leakage from fuel line
6 Check of radiator for clogging
7 Check of level and type of fuel
8 Check for foreign matter in fuel
9 Check of fuel pre-filter
10 Check of fuel main filter
11 Check of level (in oil pan) and type of engine oil
12 Check of coolant level (in sub tank)
13 Check of air cleaner for clogging
1 Check for unusual sounds and smells
2 Check for oil leakage
3 Check of hydraulic oil level
4 Check of hydraulic oil strainer
5 Check of hydraulic oil filter
6 Check of swing machinery case oil level
7 Check of damper case oil level
8 Check of final drive case oil level
9 Air bleeding
6
40-200
Item
200 General Information on troubleshooting

Checks before troubleshooting

Criterion
–
–
–
–
–
–
–
– Clean and drain
–
–
Between H
– L
Between H
Refill with coolant
– L
Dust indi-
cator does
Clean or replace
not show
red piston.
–
–
Between H
– L
– Clean and drain
–
Between H
– L
Between H
– L
–
–
PC200, 200LC, 220, 220LC-8M0
Remedy
Repair
Remove
Repair
Repair
Repair
Remove
Refilling
Replace
Replace
Refilling
Repair
Repair
Refilling
Replace
Refilling
Refilling
Refilling
Air bleeding