Komatsu PC200-8M0 Shop Manual page 1009

200 Engine and cooling system
Removal and installation of engine and hydraulic pump assembly
30. Disconnect fuel filter hose (32) from fuel supply
pump (FSP).
a The fuel filter hose can be disconnected
by pushing locks (L) at both sides.
31. Disconnect fuel supply hose (33).
32. Disconnect fuel return hose (34).
a Disconnect the clamp.
33. Remove fan (35).
34. Loosen air conditioner compressor bracket
adjusting bolt (36).
a There is another bolt behind.
35. Shift air conditioner compressor assembly
(37).
36. Remove fan belt (38).
37. Disconnect connector AC02 (39).
38. Remove air conditioner compressor assembly
(37).
a Remove air conditioner compressor as-
sembly in one piece with the bracket and
put them on the counterweight.
39. Disconnect electrical intake air heater connec-
tor E01 (40).
PC200, 200LC, 220, 220LC-8M0
[*6]
40. Disconnect connectors CE02 (41) and (42)
from the engine controller.
a The connector is locked with the inside
hex head bolt L6 (4 mm).
a Connector (42) is attached at the engine
side, however it needs to be removed not
to be obstructive in removing the engine
mounting bolts.
41. Disconnect connector (43) from the engine
[*7]
controller by pushing the lock.
42. Disconnect connector E06 (44).
[*8]
SEN06143-00
47
50-200