Komatsu PC200-8M0 Shop Manual page 1124

SEN06148-01
a Parts to be coated with primer; Apply the prim-
er all over dimension (a).
q Dimension to apply primer (a): 25 mm
a In addition to the above parts, additionally
apply the primer to right side window glass (1)
and door lower window glass (3).
q Range to apply primer additionally for right side
window glass (1): (b)
q Range to apply primer additionally for door
lower window glass (3): (c)
a After applying the primer, leave it for at least 5
minutes (within 8 hours) to dry.
8
50-700
Removal and installation of operator cab glass (stuck
a Never apply the wrong primer.
If the glass primer, etc. is applied by mistake,
wipe it off with white gasoline.
4) Apply the glass primer to the sticking sur-
faces of window glass (9).
2
Glass primer:
Sunstar primer for glass 580
super or equivalent
a Do not apply the primer more than 2
times.
(If it is applied more than 2 times, its
performance will be lowered.)
a Parts to be coated with primer; Apply
the primer to all around of sticking
surface (d) of window glass (9) for
dam rubber (6) installation position
and operator's cab (8).
a Do not apply the primer to the
boarder about 5mm wide between the
black part and transparent part of the
glass.
a After applying the primer, leave it for
at least 5 minutes (within 8 hours) to
dry.
a Never apply the wrong primer.
If the paint primer, etc. is applied by
mistake, wipe it off with white gaso-
line.
PC200, 200LC, 220, 220LC-8M0
700 Cab and its attachments