Komatsu PC200-8M0 Shop Manual page 986

SEN06143-00
26. Disconnect lubrication inlet tube (29) and lubri-
cation outlet tube (30).
a When loosening the lubrication inlet hose
mounting nut, fix the connector with a
spanner to prevent it from being dragged.
27. Remove all the mounting bolts for exhaust
manifold (31) except a few pieces.
28. Lift temporarily exhaust manifold and turbo-
charger assembly (80), and remove the
remaining mounting bolts.
29. Lift off exhaust manifold and turbocharger
assembly (80) to remove it.
4
Exhaust manifold and turbocharger
assembly: 25 kg
24
50-200
Removal and installation of cylinder head assembly
30. Remove fan (32).
a Keep the fan dropped down.
[*14]
[*15]
31. Loosen air conditioner compressor bracket
mounting bolts (33) and (34).
32. Remove air conditioner compressor drive belt
(35).
33. Disconnect connector AC02 (36).
[*16] 34. Remove air conditioner compressor assembly
(37).
a Remove air conditioner compressor as-
sembly in one piece with the bracket and
put them on the counterweight.
200 Engine and cooling system
PC200, 200LC, 220, 220LC-8M0
[*17]
[*18]