Komatsu PC200-8M0 Shop Manual page 1008

SEN06143-00
a Install frame (22). (For scaffold)
23. Remove fuel filter and bracket assembly (25).
a Put it on the engine.
24. Remove hose (26).
a MIKALOR clamp
a Mark the hose edge and tube to show the
original hose installation positions. (See
figure below.)
a If disconnecting air intake connector (C),
replace the gasket.
25. Disconnect radiator hose (27).
a Mark the hose edge and tube to show the
original hose installation positions.
26. Disconnect heater hose (28).
46
50-200
Removal and installation of engine and hydraulic pump as-
27. Remove fan guard (29).
28. Disconnect air cleaner tube (30).
29. Remove aftercooler hose and tube assembly
(31).
a MIKALOR clamp
a Mark the hose edge and tube to show the
original hose installation positions. (See
figure below.)
[*2]
[*3]
200 Engine and cooling system
PC200, 200LC, 220, 220LC-8M0
[*4]
[*5]