Komatsu PC200-8M0 Shop Manual page 1067

400 Undercarriage and frame
Separation and connection of track shoe assembly
6. Move guide pin [1] and place block [2] under
track shoe (3) to support in front of the idler.
7. Pull out guide pin [1] and remove block [2] so
that track shoe (3) can be separated.
8. Move the machine slowly in reverse to sepa-
rate the track shoe (3).
PC200, 200LC, 220, 220LC-8M0
Installation
1. While tensing wire [3] with a forklift truck, work
equipment, etc., move the machine forward
slowly to wind track shoe (3).
2. By using bar [4], hammer [5], etc., wind track
shoe (3) and match the pin holes of link (6).
[*4] a Place block [2] etc. under track shoe (3) in
front of the idler to support the track shoe.
SEN06145-00
15
50-400