Komatsu PC200-8M0 Shop Manual page 1035

300 Power train
Disassembly and assembly of final drive assembly
2) Install No. 2 planetary carrier assembly
(16).
a Align the four gear shaft ends of No. 2
planetary carrier assembly (16) with
the four dimples on the motor case
end face to install.
8. Thrust washer
Install thrust washer (15).
PC200, 200LC, 220, 220LC-8M0
9. No. 2 sun gear
Install No. 2 sun gear (14).
10. No. 1 sun gear shaft
Install No. 1 sun gear shaft (11).
11. Thrust washer
Install thrust washer (13).
12. Ring gear
1) Install the O-ring to the hub.
2) Install ring gear (12) on the hub.
4
Ring gear: 45 kg
a Degrease the mating faces of the ring
gear and hub. Do not apply liquid gasket
on the mating faces.
a Align the bolt holes of the ring gear with
those of the hub.
SEN06144-00
19
50-300