Komatsu PC200-8M0 Shop Manual page 1069

400 Undercarriage and frame
Separation and connection of track shoe assembly
a Apply grease to the contact surfaces (B) of the
bushing end and dust seal.
2
Contact surface (B portion) between bushing
and dust seal:
Grease NIGTIGHT LYK-2 from Nippon
grease Co., Ltd.: part No. 44392708
a Press fit master pin (2) to push guide pin [1]
out.
a Using tool R, press fit master pin (2), so that
the protrusion amount (a) of the master pin is
the dimension designated below.
Protrusion of master pin
a: 2.5 ± 1 mm
PC200, 200LC, 220, 220LC-8M0
SEN06145-00
17
50-400