Komatsu PC200-8M0 Shop Manual page 1021

300 Power train
Disassembly and assembly of final drive assembly
5. No.1 sun gear shaft
Remove No.1 sun gear shaft (11).
6. Ring gear
Remove ring gear (12).
4
Ring gear: 40 kg
7. Thrust washer
Remove thrust washer (13).
8. No.2 sun gear
Remove No.2 sun gear (14).
9. Thrust washer
Remove thrust washer (15).
10. No.2 planetary carrier assembly
1) Remove No.2 planetary carrier assembly
(16).
PC200, 200LC, 220, 220LC-8M0
2) Disassemble
assembly in the following procedure.
1] Drive pin (17) into shaft (18) to
remove shaft (18) from No.2 plane-
tary carrier (19).
a Remove pin (17) from shaft (18)
after shaft (18) is removed.
2] Remove thrust washer (20), No.2
planetary gear (21), needle bearing
(22) and thrust washer (23).
11. Ring nut
1) Remove lock (24).
2) Use the tool J1 to remove ring nut (25).
SEN06144-00
No.2 planetary carrier
50-300
5