Komatsu PC200-8M0 Shop Manual page 319

600 Electrical system
Machine monitor system
Operator mode function
The operator can select the information to be displayed usually on the screen and the function to be
q
used by operating the switches.
Display and setting of some functions require special operation of the switch.
Items available in the operator mode are as follows:
q
Category
(*1)
KOMATSU logo screen
Password input screen
Breaker mode check screen
Checks before starting screen
A Warning screen after check before starting
Overdue maintenance time item screen
Working mode and travel speed check screen
Standard screen
End screen
Selecting auto-deceleration function
Selecting working mode
Selecting travel speed
Stopping alarm buzzer
Operating windshield wiper
Operating window washer
Operating air conditioner
B
Operating camera mode display
Switching between clock display and service meter display
Checking maintenance information
Setting and displaying user menu
• ECO Guidance
• Machine Setting
• Maintenance
• Monitor Setting
• Message display (including KOMTRAX messages for user)
Displaying ECO guidance
C Displaying caution monitor
Displaying action level and failure code
LCD (Liquid Crystal Display) display condition checking function
D Service meter reading checking function
Access restriction setting/password changing function
*1: The items available in the operator mode are categorized as shown below.
A: Displays that appear since starting switch is turned to "ON" position until the standard screen appears,
and the displays that appear after starting switch is turned to "OFF" position .
B: Displays that appear when the switch on the machine monitor is operated.
C: Displays when a certain condition is satisfied
D: Displays that require special switch operations.
*2: Display sequence from "ON" of starting switch to the standard screen varies depending on the settings
and conditions of the machine as follows:
V: When engine start lock is set effective
W: When engine start lock is disabled
X: When working mode at start is set to "Breaker Mode (B)".
PC200, 200LC, 220, 220LC-8M0
Item
SEN06123-00
Display order (*2)
V W X Y Z
1 1 1 1 1
2 — — — —
— — 2 — —
3 2 3 2 2
— — — 3 —
— — — — 3
4 3 4 4 4
5 4 5 5 5
53
10-600