Komatsu PC200-8M0 Shop Manual page 41

200 Foreword and general information
Handling of electrical equipment
2. While pressing lock (L2), pull out connector
(1).
a Lock (L2) is located in the back of connec-
tor (1).
Connection
1. Insert the connector securely until a click is
heard.
Pull lock type (PACKARD-2)
Disconnection
1. Disconnect the connector (2) by pulling lock
(B) (on the wiring harness side) of connector
(2) outward.
PC200, 200LC, 220, 220LC-8M0
Connection
1. Insert the connector securely until a click is
heard.
Push lock type (1) (BOSCH-3)
Disconnection
1. While pressing lock (C), pull out connector (3)
in the direction of the arrow.
114 series
q
q 107 series
a If the lock is located on the underside, use
flat-head screwdriver [1] since you cannot
insert your fingers.
While pushing up lock (C) of the connector
with flat-head screwdriver [1], pull out con-
nector (3) in the direction of the arrow.
SEN06112-00
25
00-200