SEN06128-00
Monitoring / Pre-defined
The machine monitor can monitor the condition of
the machine in real time by receiving signals from
various switches, sensors, and actuators installed
to many parts of the machine and the information
from the controllers which control them.
In the monitoring / pre-defined, monitoring items
that are used frequently in daily work are selected
beforehand.
1.
Selecting the menu
Select "Monitoring / Pre-defined" on the "Ser-
vice Menu" screen.
2.
Check of monitoring / pre-defined information
After the "Monitoring / Pre-defined" screen is
displayed, you can check the items displayed
in the troubleshooting support by using the
function switches.
[F1]: Moves to the next page (screen)
q
q
[F2]: Moves to the previous page (screen)
q
[F4]: Selects hold or its releasing
(If hold is selected, a diagonal line is dis-
played on the HOLD portion)
q
[F5]: Returns to service menu screen
a You can select and check any items not
displayed in "Monitoring / Pre-defined"
from the "Monitoring items".
20
30-102
102 Testing and adjusting, Part 2
Special functions of machine monitor
a If the working mode is changed to breaker
mode [B], the screen to confirm the change of
the setting is displayed as in changing the
working mode on the standard screen.
PC200, 200LC, 220, 220LC-8M0