Komatsu PC200-8M0 Shop Manual page 432

SEN06128-00
a If no control lever is operated for 10 seconds
while a failure enough to display an action level
is occurring with the display panel in the cam-
era mode, the screen returns to the standard
screen and displays information about that fail-
ure.
a When two or more cameras are connected, the
image of one of them or the images of two of
them can be displayed.
a When 2-camera image display [F4] is selected,
images of cameras 1 and 2 are displayed on
the right and left side of the screen.
You can specify which of image of cameras 1
and 2 to appear on the right side and which on
the left side from "Camera" in the service
mode.
Operation to display clock and service meter
While the standard screen is displayed, if [F4] is
pressed, the service meter and the clock are dis-
played alternately in section (a).
a When selecting the clock display, perform the
time adjustment, 12-hour or 24-hour display
setting, and summer time setting by using the
user mode functions.
12
30-102
102 Testing and adjusting, Part 2
Special functions of machine monitor
Check of maintenance information
You can check the maintenance information on the
maintenance screen by pressing [F6] while the
maintenance monitor is displayed.
When the maintenance monitor does not appear,
press [F6] and then press [F1] or [F2]. Then make
sure the display is switched to the maintenance
screen.
a To reset the remaining time after finishing
maintenance, more operations are necessary.
PC200, 200LC, 220, 220LC-8M0