How To Read The Shop Manual - Komatsu PC200-8M0 Shop Manual

200 Foreword and general information

How to read the shop manual

How to read the shop manual

Some attachments and optional parts described in this shop manual may not be arranged for certain
q
areas. Contact your Komatsu distributor if one or some of them are required.
q Materials and specifications are subject to change without notice.
The shop manuals are available for "Machine part" and "Engine part". For the engine, see the shop
q
manual for the same model of the engine as the one which is mounted on the machine.
Composition of shop manual
q This shop manual describes the technical information required for the services performed in a work-
shop.
The shop manual is divided into the following chapters for the convenience of use.
00. Index and foreword
This section includes the index, foreword, safety and basic information.
q
01. Specification
This section explains the specifications of the machine.
q
10. Structure, function and maintenance standard
q This section explains the structure, function, and maintenance standard values of each component. The
structure and function sub-section explains the structure and function of each component. It serves not
only to give an understanding of the structure, but also serves as reference material for troubleshooting.
The maintenance standard sub-section explains the criteria and remedies for disassembly and service.
20. Standard value table
q The standard values for a new machine and trouble shooting are described. This standard value table is
used for testing and adjusting, and determining a failure at troubleshooting.
30. Testing and adjusting
q This section describes the measuring tools and how to measure, and how to adjust various parts. As for
the standard value and failure criterion, see the standard value table.
40. Troubleshooting
q This section describes the troubleshooting in a suspected area when a failure occurs and the remedy for
the failure. Troubleshooting is described by each failure mode.
50. Disassembly and assembly
This section explains the procedures for removing, installing, disassembling, and assembling each part
q
or component and the special tools for the works as well as precautions for doing them safely. In addi-
tion, tightening torque, and quantity and weight of coating material, oil, grease, and coolant required for
the works are also explained.
80. Appendix
q The structure and function, testing and adjusting, and troubleshooting for all of the other components or
equipment which can not be separately classified are explained together in the appendix.
90. Diagrams and drawings
q This section gives hydraulic circuit diagrams and electrical circuit diagrams.
Revision and distribution
Any additions, revisions, or other change of notices will be sent to KOMATSU distributors. Get the most up-
to-date information before you start any work.
Filing method
File by the brochures in the correct order of the form number printed in the shop manual composition table.
PC200, 200LC, 220, 220LC-8M0
SEN06112-00
1
9
00-200