Komatsu PC200-8M0 Shop Manual page 58

SEN06112-00
Abbrevia-
Full Spelling
tion
Komatsu
KCSF Catalyzed Soot
Filter
Komatsu Diesel
KDOC
Oxidation Catalyst
Komatsu Diesel
KDPF
Particulate Filter
Komatsu Traction
KTCS
Control System
Komatsu Variable
KVGT Geometry
Turbocharger
Liquid Crystal
LCD
Display
Light Emitting
LED
Diode
Local Interconnect
LIN
Network
LS Load Sensing
Low Voltage
LVDS Differential
Signaling
MAF Mass Air Flow
Multimedia
MMS Messaging
Service
NC Normally Closed
NO Normally Open
Open-center Load
OLSS
Sensing System
Pressure
PC
Compensation
Palm command
PCCS
control system
Pre-stroke Control
PCV
Valve
42
00-200
Purpose of use (major
applicable machine (*),
or equipment/device)
Engine
Engine
Engine
Travel and brake (HM
system)
Engine
Machine monitor
Electronic parts
Communication and
electronic control
Oil pressure
Communication and
electronic control
Engine
Communication
Electric and hydraulic
Electric and hydraulic
Oil pressure
Oil pressure
Steering (D)
Engine
200 Foreword and general information
Explanation
This filter is used to capture soot in exhaust gas.
It is built in to KDPF.
The catalyst used for purifying exhaust gas.
It is built in to KDPF.
This component with built-in KDOC (catalyst) and
KCSF purifies exhaust gas. Part building in (soot-
capturing filter)
It is installed in place of the currently used muffler.
Function that recovers the drive force of the
wheels by braking automatically with the optimum
force and at the same time activates the inter-axle
differential lock when the wheels idle while the
machine travels on the soft ground road.
The turbocharger on which the cross-section area
of the exhaust passage is made variable.
Liquid Display Image display equipment such as
the monitor which assembles in the liquid crystal
element.
Light Emitting Diode Semi-conductor element that
emits light when the voltage is applied in the
normal direction.
One of communication standards that is used in
the network on the machine
Function that detects differential pressure of pump
and controls discharge amount according to load.
One of communication standards that is used in
the network on the machine
It means the intake air flow of the engine. It is not
used independently but used together with the
sensor. The mass air flow sensor may be called
MAF sensor.
Service that allows transmission and reception of
short messages consisting of characters or voice
or images between cell phones.
Device actuated to open electric or hydraulic
circuits that are normally closed if not actuated.
Device actuated to close electric or hydraulic
circuits that are normally open if not actuated.
Hydraulic system that can operate multiple
actuators at the same time, regardless of the load.
A function used to correct oil pressure.
System in which a controller instantly analyses
data from each lever, pedal, and dial, and
performs optimum electronic control of the engine
and transmission.
Valve installed at inlet port of pump to adjust fuel
intake amount in order to control fuel discharge
amount of supply pump.
PC200, 200LC, 220, 220LC-8M0
List of abbreviation