List Of Abbreviation - Komatsu PC200-8M0 Shop Manual

SEN06112-00

List of abbreviation

This list of abbreviations includes the abbreviations used in the text of the shop manual for parts, com-
q
ponents, and functions whose meaning is not immediately clear. The spelling is given in full with an out-
line of the meaning.
q Abbreviations that are used in general society may not be included.
Special abbreviations which appear infrequently are noted in the text(marked wit a).
q
q This list of abbreviations consists of two parts. The first part is a list of the abbreviations used in the text
of the manual, and the second part is a list of the abbreviations used in the circuit diagrams.
List of abbreviations used in the shop manual
Abbrevia-
Full Spelling
tion
Anti-skid Brake
ABS
System
Automatic Idling
AISS
Setting System
Advanced
AJSS Joystick Steering
System
Automatic
Retarder
ARAC
Accelerator
Control
Automatic
ARSC Retarder Speed
Control
Automatic Spin
ASR
Regulator
ATT Attachment
Brake cooling oil
BCV
control valve
Controller Area
CAN
Network
Crankcase
CDR Depression
Regulator
Closed-center
CLSS Load Sensing
System
Common Rail
CRI
Injection
40
00-200
Purpose of use (major
applicable machine (*),
or equipment/device)
Travel and brake (HD,
HM)
Engine
Steering (WA)
Travel and brake (HD,
HM)
Travel and brake (HD,
HM)
Travel and brake (HD,
HM)
Work equipment
Brake (HD)
Communication and
electronic control
Engine
Oil pressure
Engine
200 Foreword and general information
Explanation
Function with which when the tires skid (wheels
stop rotating), the brakes are released, and when
the wheels start to rotate, the brakes are applied
again.
Automatic setting function of idling speed
Function that a lever can perform the steering
operations, shifting gear speed operation and
changing direction operation instead of a steering
wheel.
Function that the retarder works automatically with
a certain braking force when the accelerator pedal
is released while the machine travels downhill.
Function that the retarder works automatically with
a certain braking force so that the machine travels
with the speed not exceeding the speed set by the
operator when the accelerator pedal is released
while the machine travels downhill.
Function with which, when the rear wheels spin on
soft ground surfaces, this function automatically
uses the optimum braking force to drive both
wheels.
A device that can be fixed onto a machine in order
to enable it to do different jobs.
Valve that bypasses part of the brake cooling oil to
reduce the load on the hydraulic pump when the
retarder is not being used.
One of communication standards that is used in
the network on the machine
Regulator valve that is installed to the KCCV
ventilator It is not used independently and
described CDR valve.
System that can simultaneously actuate multiple
actuators regardless of the load (provides better
combined operation comparing to OLSS).
Function to maintain optimum fuel injection
amount and fuel injection timing by using engine
controller to perform electronic control of supply
pump, common rail, and injector.
PC200, 200LC, 220, 220LC-8M0

List of abbreviation

1