Komatsu PC200-8M0 Shop Manual page 456

SEN06128-00
Default value: "Maintenance Notice Time"
q
set in machine monitor (Recommended by
the manufacturer and not changeable).
Set value code: Maintenance interval that
q
can be freely set. Maintenance reminder
function works according to this set time in
operator mode (which is set in increments
of 25 hours).
q [F3]: Decreases set value
q [F4]: Increases set value
[F5]: Cancels setting before enter and
q
returns to the "Maintenance Mode
Change" screen.
[F6]: Enters setting and returns to "Main-
q
tenance Mode Change" screen
a After entering the selection with the [F6]
key, return to the "Maintenance Mode Set-
ting" screen by pressing [F5], and the set-
ting will be made.
a If the set value of an item of which mainte-
nance reminder function is set to "ON" is
changed after one operating hours or
more from the setup, the change is recog-
nized as a reset of the remaining time.
36
30-102
102 Testing and adjusting, Part 2
Special functions of machine monitor
7. Function of All Default Value
After selecting "99 All Default Value" and the
screen is displayed, set with the function
switches.
q If this function is executed, the set values
of all the maintenance items are initialized.
[F5]: Returns to "Maintenance Mode Set-
q
ting" screen
q [F6]: Enters initialization
a A while after [F6] is pressed, the initializa-
tion completion screen is displayed. Then,
if the "Maintenance Mode Setting" screen
is displayed, initialization is completed.
PC200, 200LC, 220, 220LC-8M0