Komatsu PC200-8M0 Shop Manual page 416

SEN06127-00
3) Tighten the stay mounting bolts so that the
clearance to the stay mating face will be
even.
3. Adjustment of unretractableble mirrors
1) See the "Adjusting mirrors" page, adjust
mirrors (c1) and (d1) so that the operator
can see persons at 1 m arou nd the
machine (hatched area) from the opera-
tors seat.
a If the mirror is hard to adjust, loosen mirror
screw (1).
2) Tighten screw (1) of mirror.
3
Screw:
3.0 to 3.5 Nm {0.31 to 0.35 kgm}
a When adjusting mirror, secure clearance
(g) so that mirror stay does not interfere
with mirror.
64
30-101
101 Testing and adjusting, Part 1
Installation and adjustment of mirrors
PC200, 200LC, 220, 220LC-8M0