Operating the appliance
Function switch
You can switch on the appliance using the function
switch 4, and can also set three different functions:
Symbol
OFF
The appliance is switched off .
Temperature control
■
Use the temperature control 3 to set the desired
temperature .
Timer
Use the timer 5 to set the cooking time .
■
Set the timer 5 to the desired cooking time .
The control lamp 6 lights up . Once the set time
has elapsed, a beep sounds and the appliance
stops heating . The control lamp 6 goes out .
NOTE
You can also use the timer 5 as a short-period
timer without the heating function .
–
Set the function switch 4 to
–
Set the desired time on the timer 5 .
The switch of the timer 5 now rotates anticlock-
wise to "OFF" . A beep sounds when the set time
has elapsed . The appliance does not heat up .
■
24
│
GB │ IE
Meaning
"Top heat"
e .g . for grilling
"Bottom heat"
e .g . for baking cakes
"Top & bottom heat"
e .g . for baking pizza
"OFF"
.
OFF
Grilling and baking
CAUTION! MATERIAL DAMAGE!
►
Never place any containers or food directly
onto the floor of the appliance, the heating
elements or the crumb tray 7 .
1) Place the crumb tray 7 in the appliance .
2) Remove the rack 8 and baking tray 9 from
the appliance . If required, cover these with
baking paper or grease the baking tray 9
with fat/oil that is suitable for baking .
NOTE
►
The oven must be pre-heated appropriate
to each dish . Refer to the guidelines in the
respective recipe . Pre-heating is useful for:
–
very short baking times,
–
crisp crusts,
–
delicate dishes that require a constant
temperature, such as soufflés .
►
If no pre-heating is required, skip step 3) .
3) Allow the appliance to heat up until it reaches
the desired temperature (this takes about
10 minutes, depending on the temperature
setting):
–
Select the desired temperature using the
temperature control 3 .
–
Then select the required function using the
function switch 4 .
–
Use the timer 5 to set the preheat time
(approx . 10 minutes) .
–
Close the glass door .
SGB 1200 A4