Table of Contents
Advertisement
1. WARNINGS & SAFETY INFORMATION
Please read this important safety information before
proceeding to the manual.
Install this product in an environment where the temperature ranges from 0 °C to +40 °C and the relative humidity
is less than 80%. If condensation is expected to form, heat up the fresh outside air by a duct heater etc.
This unit is designed for the indoor installation only, it is not suitable for outdoor installation.
It is recommended that no packaging should be removed until the unit reaches the installation point so that no damage
occurs on the unit. Select an adequately sturdy position for installing the product and install it properly and securely.
This unit must only be used and installed according to the installation, user and maintenance manual.
(Otherwise all guarantees and warranties will be void.)
Electric supply to unit should be isolated before performing any maintenance or repair work.
Any work on the unit apart from basic maintenance should be carried out by a suitably qualified person.
It is recommended protective gloves to be worn during installation.
Only original manufacturer replacement on spare parts should be used.
Unit should not be operated without all external panels in place.
Do not touch the hot surfaces during the operation of the unit.
This product must not be disassembled under any circumstances. Only authorized repair technicians are qualified
to conduct disassembly and repairs.
Perform the preliminary inspections before starting-up the unit.
By not following these instructions when carrying out routine maintenance of the unit may result in damage to
the unit and/or injury of the operator.
Dirty filters should be placed in a sealed container and be destroyed in compliance with local solid waste
procedures.
Care should be taken to not damage the fans when cleaning. It is recommended that a soft brush or vacuum cleaner
to be used.
www.airflow.com
USER
AND MAİNTENANCE MANUAL
3
Hide quick links:
Advertisement
Table of Contents
