Modbus Settings For The Metpoint; Sd23 - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

Mobile hand-held measuring device

Hide thumbs Also See for METPOINT BDL portable:

Table of Contents

This is the setting instructions for the Rel. Hum. and Pressure dew point and Temp.

12.3.2.3.3 Modbus settings for the METPOINT

When connecting the METPOINT

required:

First step: select a free sensor channel

Main menu  Settings  Sensor settings  Select a free channel (example: channel A1)

Second step: select Modbus type

Main menu  Settings  Sensor settings  A1  Type text field  Select Modbus and confirm with

>OK<.

Third step: define a name

Main menu  Settings  Sensor settings  A1  Name text field

Now, a name needs to be entered.

Fourth step: define the Modbus settings

Main menu  Settings  Sensor settings  A1  Modbus settings

METPOINT

BDL portable

SD23 via Modbus, the following settings are

The corresponding Modbus ID can be taken

from the data sheet of the sensor (here, for

example, 1).

Adjust the other parameters according to the

illustration.

Operation METPOINT® BDL portable

Table of Contents