Virtual channels (optional)
13.2.7 Resolution of the decimal places – designating and recording data values
Main menu Settings Sensor settings Virtual channels V1 Tool button
Main menu Settings Sensor settings Virtual channels V1 Recording button
Caution:
Prior to recording the selected measuring data, the data logger must be activated subsequent to the
completion of the settings (see Chapter
See also Chapter
7.3.2.1.2.2 Messdaten bezeichnen
80
The
resolution
name
and
value name
Tool button.
For the
value
characters can be entered in order to simplify
its identification at a later moment in the menu
items
Graphics
Otherwise, the designation would be V1a, for
example.
V1
is the channel name and
ured value in the channel,
ond, and
c
the third.
The
resolution
adjustable by pressing right and left (0 to 5
decimal places).
With the
Recording
are selected which are stored at an activated
data logger.
7.3.2.1.3 Logger-Einstellung (Datenlogger)).
und
7.3.2.1.2.3 Messdaten aufzeichnen
of the decimal places,
short
can be found below the
to be recorded, a
name
and
Graphics/current
values.
a
the first meas-
b
would be the sec-
of the decimal places is easily
buttons, the measuring data
METPOINT
with 10
®
BDL portable