Operation METPOINT® BDL portable
Main menu Settings Logger settings Start time button/Stop time button Date/time text field
Cal button
Main menu Settings Logger settings Start button
Main menu Settings Logger settings Start button/stop button
Important:
When a new recording file is to be created, the
erwise, the recording file that was created last will be used.
52
By means of the
date can easily be chosen from the calen-
dar.
Subsequent to the
vation and the implemented settings, the
Start
button is pressed and the data logger
is on active.
The data logger will start recording at the
set time!
The data logger can also be activated and
deactivated without activated time set-
tings, namely by means of the
Stop
buttons.
On the lower left, it is indicated, how many
values are being recorded, and for how
long recording can be continued.
Note:
Settings cannot be changed when the data
logger is active.
Force-new-logger file
button must be activated. Oth-
Cal
button, the desired
start
or
stop time
acti-
Start
and
®
METPOINT
BDL portable