8
TROUBLESHOOTING
(1)
(2)
(3)
(4)
8 - 2
POINT
If more than one error occurs, the error code first detected by the A/D
converter module is stored. No other error codes will be stored.
Error code marked with
(YF).
The error is cleared at the time of mode switching.
Error code marked with
meet the conditions shown in POINT in Section 3.1.2 (1) or Section 3.1.2 (2).
Set the offset and gain values that meet the conditions shown in POINT in
Section 3.1.2 (1) or Section 3.1.2 (2).
2 can be cleared by turning on Error clear request
3 may occur if the offset and gain values do not
MELSEC-Q
8
8 - 2