Appendix 2.2 G(P).Ogload - Mitsubishi Electric Melsec Q Series User Manual

APPENDICES

Appendix 2.2 G(P).OGLOAD

Internal device
Setting (System, user)
data
Bit
(S) —
(D)
[Instruction [Execution
symbol] condition]
G.OGLOAD
GP.OGLOAD
Setting data
Un Start I/O number of the module
(S) Start number of the device in which control data is stored.
Device that is turned on 1 scan on completion of the
(D) dedicated instruction processing.
(D) + 1 also turns on at an abnormal completion.
Device
(S)
(S) + 1 Completion status
(S) + 2 Pass data classification setting
(S) + 3
(S) + 4 CH1 Industrial shipment settings offset value
(S) + 5 CH1 Industrial shipment settings gain value
(S) + 6 CH2 Industrial shipment settings offset value
(S) + 7 CH2 Industrial shipment settings gain value
(S) + 8 CH3 Industrial shipment settings offset value
(S) + 9 CH3 Industrial shipment settings gain value
1 Set only the pass data classification setting (S)+2. If data is written to the area set by the system, the offset/gain values
will not be read properly.
App. - 6
Reads the offset/gain values of the user range setting of the A/D converter module to
the CPU.
Link direct device
File
register
Word Bit
Command
Command
Description
Control data
Item
System area
System area
Usable devices
Intelligent
J \ function
module
device
Word
U \G
—
—
G.OGLOAD
GP.OGLOAD
Setting data
Within the range of the
specified device
Within the range of the
specified device
1
of the Q64AD (1/2)
Setting data
—
Stores the status when the instruction
is complete.
0
completion
Other than 0: Abnormal completion
Specify the voltage/current of the
offset/gain values to be read.
0: Voltage specified
1: Current specified
b15 b4 b3
0 0 CH.4 CH.3 CH.2 CH.1
—
—
—
—
—
—
—
Constant
Index
register
Z
K, H
—
—
Un (S)
Un (S)
Setting range
0 to FE
H
Setting range
: Normal
0000
H
b2 b1 b0
MELSEC-Q
Others
$
— —
— —
(D)
(D)
Data type
Binary 16 bits
Device name
Bit
Set by
— —
— System
to 000F User
H
— —
— System
— System
— System
— System
— System
— System
App. - 6