Part Identification Nomenclature - Mitsubishi Electric Melsec Q Series User Manual

4 SETUP AND PROCEDURES BEFORE OPERATION

4.3 Part Identification Nomenclature

4 - 3
The name of each part of the A/D converter module is listed below.
Name and
Number
appearance
1) RUN LED
2) ERROR LED Displays the error status of the A/D converter module.
3) Serial
number plate
1 Check Error code for details.
Displays the operating status of the A/D converter module.
On : Normal operation
Flashing : During offset/gain setting mode
Off : 5V power switched off, watchdog timer error
occurred, or online module change enabled
On : Error
Off : Normal operation
Flashing : Error in switch settings
Switch No. 5 of the intelligent function module has been
set to a value other than zero "0".
Indicates the serial No. of the A/D converter module.
Description
1
MELSEC-Q
4 - 3