Slotted Screwdriver; Direct Grindstone Grinding; Cleaning And Care - Silvercrest HG01100 Operation And Safety Notes

Slotted screwdriver

A screwdriver can be flat ground with the functional and protec-
tive cover
6
one of the two grinding openings
and protective cover
the face of the screwdriver level and flat.

Direct grindstone grinding

Some blades can be ground by the grindstone
ing the functional and protective cover
tional and protective cover
the top. To reattach the functional and protective cover
the arrow at the top. Attach the functional and protective cover
and turn left or right to lock into place.
CAUTION: Clean the knives, screwdrivers and scissors before use
after sharpening.

Cleaning and Care

CAUTION! RISK OF ELECTRIC SHOCK!
Unplug the mains plug from the socket before performing any
work on the device.
Never immerse the device in water or other liquids. Danger to life
from electric shock due to moisture coming into contact with elec-
tric components. Components may further be damaged.
Turn the functional and protective cover
top. Remove the functional and protective cover
area around the grindstone
in any position. Insert the slotted screwdriver through
based on the width. You may now grind
6
(Fig. F) by turning it until the arrow is at
6
5
(Fig. E)
at the front of the functional
4
directly without us-
5
. To do so, remove the func-
6
until the arrow is at the
6
with a dry brush.
, hold it with
6
6
and clean the
6
GB/MT 49