HP 9000 Manual page 108

Installing from the Ignite-UX Server
Configuring the Installation
For LVM:
• One of the logical volumes must be root (/).
• A swap volume is required.
• Directory names must have valid HP-UX names (e.g., /usr,
The buttons which activate changes are:
• Add
• Modify
• Remove
Generally, changes are not put into effect until you select one of these. If
you make a change and then leave the tab without using one of these
buttons, your changes may not be applied.
Usage Select this field to display a selection list of file system usage types. If
you want to change file system type or usage for the selected item, select
an item in this list. The usages are as follows:
• None: If you want to protect the data on a disk or file system and
• HFS: Select this item to create a High-Performance File System.
• SWAP: Select this item to create swap.
• SWAP-Dump: Select this item to create an area for both swap and
• VxFS: Select this item to create a Journaled File System. This is an
• Unused: This means the logical volume will be created, but not used.
VG Name (Volume Click on the field to open a selection list. You can choose a volume group
Group Name)
name from the list.
108
/database, etc.).
"reserve" it from being overwritten during the installation process,
select this list, and select "unused" by clicking on this item. Then
select the button.
Modify
system dump.
extent-based, journaled file system featuring high-reliability, fast
recovery time and on-line administration.
Chapter 5